• Home /
  • Wireless Sensors /
  • S-100 Wireless T, %RH, WME Sensor with 64K Reading Datalogging Memory, Accuracies ΔRH = ±1.8 %RH, ΔT = ±0.2 °C
Picture of S-100 Wireless T, %RH, WME Sensor with 64K Reading Datalogging Memory, Accuracies ΔRH = ±1.8 %RH, ΔT = ±0.2 °C
Picture of S-100 Wireless T, %RH, WME Sensor with 64K Reading Datalogging Memory, Accuracies ΔRH = ±1.8 %RH, ΔT = ±0.2 °C
Picture of S-100 Wireless T, %RH, WME Sensor with 64K Reading Datalogging Memory, Accuracies ΔRH = ±1.8 %RH, ΔT = ±0.2 °C
Picture of S-100 Wireless T, %RH, WME Sensor with 64K Reading Datalogging Memory, Accuracies ΔRH = ±1.8 %RH, ΔT = ±0.2 °C
Picture of S-100 Wireless T, %RH, WME Sensor with 64K Reading Datalogging Memory, Accuracies ΔRH = ±1.8 %RH, ΔT = ±0.2 °C
Picture of S-100 Wireless T, %RH, WME Sensor with 64K Reading Datalogging Memory, Accuracies ΔRH = ±1.8 %RH, ΔT = ±0.2 °C
Picture of S-100 Wireless T, %RH, WME Sensor with 64K Reading Datalogging Memory, Accuracies ΔRH = ±1.8 %RH, ΔT = ±0.2 °C

S-100 Wireless T, %RH, WME Sensor with 64K Reading Datalogging Memory, Accuracies ΔRH = ±1.8 %RH, ΔT = ±0.2 °C

S-100 Wireless Temperature, Humidity and Moisture Content (WME) Sensor with 64K Reading Datalogging Memory replaces S-11 and S-160 improves on S-11/S-160 with IP67 waterproof rating, addition of a push button to control sensor, and improved T/RH sensor with higher accuracy, faster response time and ability to read > 100% RH.

The S-100 datalogging Tempreature, RH and WME sensor replaces our S-160 sensor and improves on the S-160 with the addition of these new features:

  • IP67 waterproof rating
  • Push button for initiating self test and erasing data storage memory
  • Improved T/RH sensor with higher accuracy ΔRH = ±1.8 %RH, ΔT = ±0.2 °C, faster response time ability to read > 100% RH
  • Improved durability with heavy duty 304 stainless steel pads for monitoring WME
  • improved battery retention designed to better survive high impact drops

It can store up to 64K (65,535) readings where a single reading includes temperature, humidity and WME data.  Readings are stored in local FLASH memory if there is no gateway detected within wireless range.  If a gateway is present, the sensor uploads all readings stored in memory and continues to send regular readings to the gateway.  Readings are stored in FLASH memory and are kept even with the battery removed.

High accuracy (±0.2°C/±1.8%RH) sensor monitors Temperature, Humidity and Moisture Content (also known as WME or Wood Moisture Equivalent). This sensor integrates a wireless transceiver, temperature sensor, humidity sensor, pin type (resistance) moisture meter and 64K reading memory into a compact form factor of 2.5 x 1.625 x 0.875 inches.  The sensor operates from a long life Lithium battery with a typical battery life of 15+ years when configured to take readings once per hour.  Typical applications include:

  • Long term structural performance monitoring
  • flat roof leak monitoring
  • water, mold or moisture damage forensics
  • data center air quality monitoring
  • warehouse air quality monitoring
  • leak and moisture detection
  • thermal performance monitoring
  • monitor drying at disaster and flood recovery job site
  • monitor lumber drying in kilns
  • monitor concrete equilibrium %RH
  • monitor vacation homes for leaks or high humidity
  • Cold Chain Monitoring of ambient conditions in shipping containers containing temperature, humidity or moisture sensitive items
  • Cold Chain Monitoring of mobile chilled food storage such as refrigerated trucks or rail cars
  • Cold Chain Monitoring of refrigerated shipments

Comes With:

  • ER14505 3.6V Lithium Thionyl Chloride Battery
 Documentation
Sensor Installation Manual
S-100 Quick Start Guide
S-100 Wireless T, %RH, WME Sensor with 64K Reading Datalogging Memory S-160-2.0,±0.2°C/±1.8%RH
OmniSense high accuracy Datalogging Wireless Moisture Meter, Temperature, %RH and % Moisture Content, ±0.2°C/±1.8%RH accuracy
*
$114.95
PRICE BREAKS - The more you buy, the more you save
Quantity51+101+
Price$103.45$91.95
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Product tags
Related products
Picture of Mounting Screws for S-1 , S-10, S-11, S-16 and S-160 sensors

Mounting Screws for S-1 , S-10, S-11, S-16 and S-160 sensors

#12 x 2" 18-8 stainless steel mounting screws for S-1, S-10, S-11, S-16 and S-160 sensors includes screws and 18-8 stainless split washers. One pack includes 2 screws and 2 washers.
From $0.85
Only registered users can write reviews